基于SHARC数字脉压系统的设计与实现

详细介绍了采用两片浮点DSP ADSP21062实现某舰载雷达所需要完成的舰速补偿、反异步干扰和脉冲压缩的系统研制。通过采用分段匹配滤波的方法，极大地节约了时间和空间。与完成同样功能采用单片TMS320C6701的设计相比，本设计具有外围电路简单、系统调试容易等优点。     

Equilibrium Moisture Characteristics of High Oleic Sunflower Seeds and Kernels

The equilibrium moisture content (EMC) characteristics of high oleic sunflower seeds and kernels between 10 and 55°C were determined by equilibrating the samples to known relative humidities (RH) above saturated salt solutions. EMC of the kernels was lower than that of seeds in the range of 11 to 96% ERH and at 25 and 40°C. Hysteresis effect was found for the EMC properties of seeds and kernels at 25°C. Four EMC-ERH models (modified Henderson, Chung-Pfost, Halsey, and Guggenheim-Anderson-de Boer) and their estimated parameters were evaluated for goodness of fit. GAB and Halsey equations showed the best fitting of experimental data although GAB equation adjusted for temperature described the EMC data the best. Components of the seed as oil content or hull/kernel ratio did not explain the slight differences in EMC found between the varieties.     

利用地震属性钻前预测井壁稳定性

钻前准确预测井壁稳定性是防止钻进过程中井壁失稳的有效手段。声波时差和地层密度是井壁稳定分析的两个关键参数。根据地震记录与地层声波时差及密度之间存在的非线性关系，提出了利用地震属性钻前预测井壁稳定性的方法。从井旁地震记录中提取地震属性，通过RBF神经网络在已钻井段的地震属性与声波时差及密度之间建立起映射模型，以此为基础预测待钻地层的声波时差和密度。运用预测结果结合井壁稳定力学模型，确定岩石力学参数和地应力状态，计算井壁坍塌压力和破裂压力，确定安全钻井液密度窗口，实现钻前井壁稳定预测。该方法在塔里木油田的应用中取得了良好的预测效果。     

基于计算机视觉的油管螺纹非接触智能检测

针对传统接触式油管螺纹参数测量方法的缺点,开发了基于计算机视觉的油管螺纹非接触智能检测系统。在简述非接触智能检测测量原理和测量系统组成的基础上,详细介绍了利用非接触智能检测系统对油管螺纹参数进行测量的方法,其中包括图像的采集及预处理,图像的锐化,螺纹边缘轮廓的检测与提取,螺纹尺寸的测量计算与对比分析。     

Electron transport in InGaO3(ZnO)m (m=integer) studied using single-crystalline thin films and transparent MISFETs

We have investigated the characteristics of transparent metal-insulator-semiconductor field-effect transistors (MISFETs) fabricated using InGaO₃(ZnO)_m (m=integer) single-crystalline thin films as n-channel layers and amorphous alumina as gate insulator films. The MISFETs exhibit good characteristics such as insensitivity to visible light illumination, off-current as low as ∼1 nA with a positive threshold voltage of ∼3 V and on/off current ratio of 10⁵. The field-effect mobility increased from ∼1 to ∼10 cm² (V s)⁻¹ as the m-value increased. Room temperature Hall mobility also increased. However, unexpectedly these values were lower than the field-effect mobility. It is explained by existence of shallow localized state in the homologous compounds.     

Investigation of the relationships between the chain organization and rheological properties of atactic poly(vinyl alcohol) hydrogels

The structure and rheological behavior of atactic poly(vinyl alcohol) (a-PVA) hydrogels prepared by freeze/thaw cycles were investigated as a function of polymer concentration and number of freeze/thaw cycles. The presence of phases with different mobilities was observed using ¹³C CP/MAS and DP/MAS NMR experiments. The degree of crystallinity of the a-PVA-rich phase was determined by ¹H NMR free decay experiments. Measurements of the shear storage and loss modulus were performed at a fixed frequency of 1 Hz and a strain value of 0.1%, i.e. under conditions where the deformation imposed on the gel structure is entirely reversible. Results thus obtained showed that an increase in the number of freeze/thaw cycles induces an increase in the degree of crystallinity in the polymer-rich phase together with an increase in the storage modulus. The a-PVA hydrogels became more fragile as the number of freeze/thaw cycles was increased. Moreover, both the percentage of protons in a rigid environment measured by ¹H NMR and the storage modulus values tended to a limiting value after six freeze/thaw cycles. These results show that the first five or six freeze/thaw cycles play a very important role in determining the hydrogel structure and rheological properties. A more detailed comparison of NMR and rheological data led to the conclusion that the storage modulus is mainly controlled by the a-PVA crystallinity while the hydrogen bond interactions have a much smaller contribution.     

多模干涉型集成光学器件研究进展

基于自镜像效应(SIE)的多模干涉(MMI)型集成光学器件是集成光学中具有广泛用途的重要器件。本文详细而系统地综述了近几年来MMI器在国内外的研究进展，特别是其在集成光学中的应用。     

锌(Ⅱ)-氨基酸配合物分子内配体间疏水作用

应用 p H电位滴定法研究了配合物 Zn( Aa) 2 [Aa-=L- val(缬氨酸根 ) ,L- phe(苯丙氨酸根 ) ,L- trp(色氨酸根 ) ,L- tyr(酪氨酸根 ) ]在水和 2 0 %、40 %及 60 %二氧六环 /水溶液中的稳定性 [t=2 5℃ ,c=0 .1 mol/L Na Cl O4]。配合物 Zn( Aa) 2 相对于母体配合物 Zn( Aa) + 稳定性用Δlog K=log KZn( Aa)Zn( Aa) 2 - log KZn Zn( Aa) 表示。结果表明 :与 L-丙氨酸 ( L- ala)配合物 Zn( L- ala) 2 相比 ,所有这些氨基酸配合物 Zn( Aa) 2 均具有相对较大的 Δlog K值 ,表明这些配合物分子内存在着额外的稳定化作用。这种稳定性化作用可能主要归因于配合物分子内氨基酸侧链之间的疏水作用 ,并且这种作用随着氨基酸侧链结构及溶剂极性变化而变化     

结构-波浪-海床耦合系统中大圆筒结构的波压力响应

以沉入式大圆筒结构为对象，通过设计随机波浪水槽实验，测取了在单筒和连续筒两种结构型式、两种沉入深度和两种波谱输入下结构表面的动波压力分布。波面高度以及波压力历程均在领域进行分析。通过计算结构表面沿高程和沿环向的波压力谱及波压力传递函数，将单筒实测结果与基于线性绕射理论的解析解进行了比较，同时也详细对比了两种结构型式下的实测结果。文中汇报了在研究中获得的新发现及进行的相应分析，特别是在结构——波浪——海床动力相互作用下对波压力响应机理以及针对连续筒的研究，可为工程应用提供有价值的参考。     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003